AERO JetGo 900 28V Diesel-Hybrid Ground Power Unit

Engine Specs

• Fuel efficient Deutz 2.9TD 4-cylinder turbocharged diesel engine
• 24V engine electrical system
• 74hp, 2,400 RPM
• Automatic regulation of power output with instantaneous full power on demand
• Generator Performance: 800 amps continuous 28.5V and 2,000 amps 10 secs
• Hybrid performance (standard operation): In excess of 2,000 amps >10secs available utilizing hybrid batteries in conjunction with generator. <0.1 ripple.

Fuel Consumption

• 1.2 gallons/hr (4.54 liters/hr) at 50% load

Fuel Tank Capacity

• 35 US gallons (132.5 liters)
• Corrosion proof polypropylene tank
• Approximately 25 hours run time at 50% load
• Low fuel warning activation at 10% remaining
• Electronic fuel shut off at 5% fuel remaining

Hybrid Battery System

• Dual Northstar NSB 190FT-HT RED 12V (Pure Lead) cells
• Zero maintenance AGM construction (1700 CCA)

Emission Compliance

• Environmentally friendly, fuel efficient EPA Tier 4f compliant

Output Cable

• Industry leading 30’, 4/0 output cables including standard active thermal disconnect protection and long lasting ‘hardtip’ connector

Engine Displays & Instruments

• MPC 10 Digital Generator Controller
• CANbus monitor reads engine and operating parameters
• Built in alarms and fault code reporting
• Service indicator
• Modular solid state ‘plug and play’ relay system
• Low oil, high temp, overspeed, underspeed, overvolt, low fuel, overcrank monitoring
• Programmed clearance lighting incorporating flashing warning/alarm function
• Active backlit digital volt & amperage gauges
• Active overvolt control
• Fine volt adjustment panel control 27.2V – 29.2V
• Low amperage limit selection (“helicopter function”)
• Two standard LED adjustable flood lights
• USB charger
• Military grade IP 67 actuation switches with homogenous lighting
• E Stop and battery isolator switches

Construction

• Fully galvanized heavy-duty trailer and dual oversized illuminated cable storage bins
• Cable tray rollers allow for easy deployment of output cables
• Torsional suspension system
• Heavy duty fifth wheel front axle and towbar assembly
• Wide, low roll resistance tires
• Protective galvanized steel bumpers
• Custom designed polypropylene foam filled enclosures
• Available in white/grey or orange/grey color combination
• Industry leading 30’, 4/0 output cables including standard active thermal disconnect protection and long lasting ‘hardtip’ connector
• MIL-SPEC MS3506 cable heads with internal fused link

*Fuel Consumption data as shown above can vary. The calculation stated is a factor of theoretical fuel usage generated from onboard fuel prediction software and may not accurately represent the actual conditions under which this equipment is operated.